 |
 |
 |
 |
 |
 |
 |
|||||
| aaa | aaaaaaa | aaaaaaa | aaaaaa | aaaaaa | aaaaaa | aaaaaa | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
Physiology Research Instruments | ||||||||||||
| Stereotaxic Frames & Accessories | |||||||||||||
| Royem Scientific offer a complete range of stereotaxic frames and accessories. | |||||||||||||
| The Lab Standard™ Stereotaxic Instrument | |||||||||||||
 |
|
||||||||||||
| The Stellar™ Stereotaxic Instrument | |||||||||||||
 |
The Stellar™ Stereotaxic Instrument simplifies difficult stereotaxic surgery. It offers several unique benefits over other stereotaxic instruments: • Reach target nuclei without inducing damage • Effortlessly vary the angle of approach • Rotation of electrode carrier 45°, in medio-lateral and antero-posterior directions • Easily read, laser engraved scales • Smooth movements • Convenient operation • Precise targeting without calculations Stellar™ Stereotaxic ----- 51400 45µ Ear Bars ------------ 51412 Multiple Probe Carrier --- 50019 Ear Plugs ---------------- 50015 |
||||||||||||
| Stereotaxic Injector, Stepper Motorized | |||||||||||||
 |
The remote injection head is designed to be mounted on a 51600 Lab Standard™ stereotaxic instrument, to precisely control the volume and the flow rate of injections.
Injection directly through a needle on the syringe avoids the inaccuracy introduced when injections are forced through a plastic tubing. Specifications Resolution: 6.3µm per 1/2 step Syringes Accepted: Hamilton 700 & 7000 Series, 1µl - 100µl Syringes Not Accepted: Hamilton Gas Tight Series Min/Max Flow Rate: 0.01µl/min / 200µl/min Minimum Volume Settable: 0.001µl Stereotaxic Injector -------------------------------------- 53310 "V" Clamp Adapter for mounting to 51600 Stereotaxic --- 51681 |
||||||||||||
| Stereotaxic Drills May be Mounted on Lab Standard™ or other Stereotaxic Instruments | |||||||||||||
 |
This drill with a flexible drive shaft is configured for the stereotaxic surgery room. The powerful motor and flexible shaft offer very low vibration and noise for long-term
, reliable performance. The motor may be suspended from the ceiling or from the optional 58652 Motor Support with Table Clamp. Specifications Maximum Speed: 18,000 RPM Shaft Length: 99cm Shaft Diameter: 3.8mm Flexible Shaft Drill ------------------- 58655V Speed Control Dial, Optional -------- 58651 Foot Speed Control, Replacement --- 58653 Motor Support with Table Clamp ---- 58652 Optional Collet Kit ------------------- 58654 Ultrathin Handpiece ------------------ 58657 |
||||||||||||
| Dental Drill Bits | |||||||||||||
| High quality carbide drill bits cut cleaner and retain sharp edges longer. Suitable for use with the 58655V Stereotaxic drill. Spherical heads, variety of sizes. Supplied in packs of 6 bits (same size). | |||||||||||||
| Drill Bit 0.45mm --- 51455-1 Drill Bit 0.60mm --- 51455-2 Drill Bit 0.75mm --- 51455-3 Drill Bit 1.00mm --- 51455-4 Drill Bit 1.35mm --- 51455-5 Drill Bit 1.75mm --- 51455-6 |
|||||||||||||
| Lab Standard™ Probe Holders | |||||||||||||
 |
Microdialysis Probe Holder The Microdialysis Probe Holder is customised to fit a specific size of probe. The hole may be drilled to fit probes from 1.5 to 6.0mm. Default size is 1.5mm. For customised hole, please specify the size of the hole required at time of ordering Microdialysis Probe Holder --- 51637 |
||||||||||||
| Standard Probe Holder The Standard Probe Holder has 11mm square acrylic block on the bottom with grooves spaced 1mm apart. Grooves on three sides to facilitate loading of probes. The corner clamp holds shafts from 0.2 to 2.0mm. The side clamp holds probes from 0.2 to 4.5mm, as does the "C" clamp, which is useful to release implanted probes. Note: The 51631 is inlcuded with each Lab Standard™ Stereotaxic frame. Holder with corner clamp --- 51631 Holder with side clamp ----- 51632 Holder with "C" clamp ------ 51634 |
|||||||||||||
| Large Probe Holder Large Probe Holders support shafts with diameters from 6.5mm up to 13mm (0.5"). This will hold the Stereotaxic Drill. A threaded drive pulls the sliding "U" holder against the outside of the probe, pulling the probe into a "V" notch for straight and reproducible positioning. Large Probe Holder --- 51633 |
|||||||||||||
| Gas Anaesthesia Mask | |||||||||||||
 |
The Gas Adapters for Stereotaxic instruments enable gas anaesthesia without exposing the researcher to the gas. Anaesthetic gas flows through the tubing connector, past the nose, and out the other side.
From there, spent gas may be routed to recycling, exhaust, or gas analysis instruments. |
||||||||||||
For full details regarding products please see our contact page |
|||||||||||||
| next page | |||||||||||||
|
|||||||||||||