 |
 |
 |
 |
 |
 |
 |
|||||
| aaaaaaa | aaaaaaa | aaaaaa | aaaaaa | aaaaaa | aaaaaa | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Microdialysis Probes |
|
|||||||||||
| MAB 1 Flexible Microdialysis Probes | |||||||||||||
 |
Membrane: 6 kDalton cut-off Cuprophane or PES membrane Membrane O/D: 0.24 mm Shaft: PI tubing Shaft O/D: PI tubing 0.2 mm Inner cannula: Fused silica Inlet/outlet cannulas: FEP tubing Inlet dead volume: Negligible Outlet dead volume: Negligible (App. 37nl) |
||||||||||||
| The MAB 1 standard probes have a 2mm shaft length and membrane length of 4mm,
making it ideal for small areas of peripheral tissue. This probe comes with a 6,000 Dalton cut-off cuprophane
membrane stabilised with glycerol, which requires that the probes are stored in liquid between experiments. part number: MAB1.2.4 (pack of 3) |
|||||||||||||
MAB 2 Microdialysis Probes |
|||||||||||||
 |
Membrane: 35 kDalton cut-off PES membrane Membrane O/D: 0.6mm Shaft: PI tubing (Stainless steel optional) Shaft O/D: 0.5mm Inner cannula: PI tubing Inlet/outlet cannulas: PEEK tubing (Stainless steel optional) Inlet dead volume: 1.7µl Outlet dead volume: 0.5µl Given dead volumes are for 2mm membrane probe with 14mm shaft |
||||||||||||
| |||||||||||||
| The MAB 2 series of microdialysis probes come in different shaft and membrane lengths
depending on the application. Standard probes have 14mm or 20mm shaft length and membrane lengths of All the probes come with a 35,000 Dalton cut-off PES membrane. A major advantage with the membrane is the probes can be stored dry prior to use as well as between experiments. Although the probes are warranted for single use only, it is common to re-use them. Re-usable guide cannulas are available for these probes. |
|||||||||||||
MAB 3 Flexible Microdialysis Probes |
|||||||||||||
 |
Membrane: 35 kDalton cut-off PES membrane Membrane O/D: 0.6mm Shaft: Polyurethane tubing Shaft O/D: 0.5mm Inner cannula: PI tubing Inlet tubing: 20cm red FEP tubing Outlet tubing: 20cm transparent FEP tubing Inlet dead volume MAB 3.8.10: 4.1µl Outlet dead volume MAB 3.8.10: 5µl Inlet dead volume MAB 3.35.4: 4.5µl Outlet dead volume MAB 3.35.4: 4.5µl |
||||||||||||
| pack of 3: 8mm shaft, 10mm membrane MAB 3.8.10 35mm shaft, 4mm membrane MAB 3.35.4 80mm shaft, 10mm membrane MAB 3.80.10 |
|||||||||||||
| The MAB 3 microdialysis probes are a series of flexible probes. These probes are autoclavable using "Saturated steam sterilisation at 121 °c".
All probes come with 35 kDalton cut-off PES membrane. Like the MAB 2 probes, these probes can also be stored dry prior to use as well as between experiments.
Although the probes are warranted for single use only, it is common to re-use them. Probes with customer specified lengths of shaft and/or membrane are also available as well as introducers. The split tubing introducer is simple and straightforward to use. |
|||||||||||||
MAB 4 Microdialysis Probes |
|||||||||||||
 |
Membrane: 6 kDalton cut-off Cuprophane or PES membrane Membrane O/D: 0.24mm Shaft: PI tubing Shaft O/D: PI tubing 0.2mm, PI tubing top sleeve 0.5mm Inner cannula: Fused silica Inlet/outlet cannulas: PEEK tubing Inlet dead volume: Negligible Outlet dead volume: Negligible (App. 37nl) |
||||||||||||
| 15mm shaft (pack of 3): 1mm membrane MAB 4.15.1.Cu 2mm membrane MAB 4.15.2.Cu 3mm membrane MAB 4.15.3.Cu 4mm membrane MAB 4.15.4.Cu |
|||||||||||||
| The MAB 4 standard probes have 15mm shaft length and membrane lengths of 1-4mm.
These probes all come with 6,000 Dalton cut-off cuprophane membrane. Cuprophane
is stabilised with glycerol, which requires the probes to be stored in liquid between
experiments. Re-usable guide cannulas are also available for these probes |
|||||||||||||
MAB 5 Microdialysis Probes | |||||||||||||
|
Membrane: 3000 kDalton cut-off PE membrane Membrane O/D: 0.3mm Shaft: PI tubing with Stainless Steel 5mm cannula top sleeve Shaft O/D: PI tubing 0.18mm, Stainless Steel cannula 0.5mm Inner cannula: Fused Silica Inlet/outlet cannula: Stainless Steel Inlet dead volume: Negligible Outlet dead volume: Negligible (App. 37nl) |
||||||||||||
| 15mm shaft (pack of 3): 1mm membrane MAB 5.15.1 2mm membrane MAB 5.15.2 3mm membrane MAB 5.15.3 4mm membrane MAB 5.15.4 |
|||||||||||||
| The MAB 5 series of microdialysis probes come in various membrane lengths, depending on the application. Standard probes have a 15mm shaft length and membrane length of 4mm. The MAB 5 series of probes all come with 3000K Dalton cut-off Polyethylene (PE) membranes. PE is stabilised with glycerol, which requires the probes to be stored in liquid between experiments. | |||||||||||||
MAB 6 Microdialysis Probes | |||||||||||||
 |
Membrane: 15 kDalton cut-off PES membrane Membrane O/D: 0.6mm Shaft: PI tubing (Stainless Steel optional) Shaft O/D: 0.5mm Inner cannula: PI tubing Inlet/outlet cannulas: PEEK tubing (Stainless Steel optional) Inlet dead volume: 1.7µl Outlet dead volume: 0.5µl Above given dead volumes are for a 2mm membrane probe with 14mm shaft |
||||||||||||
| |||||||||||||
| The MAB 6 series of microdialysis probes come in different shaft lengths and membrane lengths
depending on the application. Standard probes have a 14mm or 20mm shaft length and membrane
length of 1-4mm, with 15 kDalton cut-off PES membrane. A major advantage with the membrane is the probes can be stored
dry prior to use as well as between experiments. The probes are also autoclavable using "saturated steam sterilization" at 121°c. Although the probes
are warranted for single use only it is common to re-use them. Probes with customer specified lengths of shaft and/or membrane are also available |
|||||||||||||
MAB 7 Flexible Microdialysis Probes | |||||||||||||
 |
Membrane: 15 kDalton cut-off PES membrane Membrane O/D: 0.6mm Shaft: Polyurethane tubing Shaft O/D: 0.5mm Inner cannula: PI tubing Inlet tubing: 20cm red FEP tubing Outlet tubing: 20cm transparent FEP tubing Inlet dead volume MAB 7.8.10: 4.1µl Outlet dead volume MAB 7.8.10: 5µl Inlet dead volume MAB 7.35.4: 4.5µl Outlet dead volume MAB 7.35.4: 4.5µl Probes with customer specified lengths of shaft and/or membrane are also available as well as introducers. The split tubing introducer is simple and straight forward to use. |
||||||||||||
| pack of 3: 8mm shaft, 10mm membrane MAB 7.8.10 35mm shaft, 4mm membrane MAB 7.35.4 80mm shaft, 10mm membrane MAB 7.80.10 |
|||||||||||||
| The MAB 7 range of microdialysis probes have flexible shafts and are autoclavable using "saturated steam sterilization" at 121°c. All probes come with a 15 kDalton cut-off PES membrane. A major advantage with this membrane is that the probes can stored dry prior to use as well as between experiments. Although the probes are warranted for single use only it is common to re-use them. | |||||||||||||
next page |
|||||||||||||
|
|||||||||||||